M.Sc. Felix Tröger
Research Assistant
Institute: PAES | Institute for Process Automation and Embedded Systems
Team: Chair of Process Control Engineering and Process Management | Prof. Dr.-Ing. Tilo Heimbold
Telephone +49 (0)341 3076 1022
Send an email | felix(dot)troeger(at)htwk-leipzig.de
HTWK Leipzig | Faculty of Engineering
Wiener-Bau | Room WI114
Wächterstraße 13, 04107 Leipzig
Research
- Electrical measurement technology
- Circuit design
- PCB design
- Software development
- 3D printing
- Functional prototyping
Precast Zero
Carbon-neutral precast concrete elements
The PRECAST ZERO project is pursuing an innovative research approach that goes beyond CO₂-neutral concrete. The project aims to develop a concrete material capable of permanently sequestering CO₂, thereby serving as a store for emissions. Given the widespread use of concrete, this technology offers considerable potential for scaling up. The aim is to lay the initial foundations for a concrete-based CO₂ storage technology. Implementation requires an interdisciplinary consortium: planning and design (Kahnt & Tietze GmbH), binder development (Oliment GmbH), processing (Betonwerk Oschatz GmbH) and scientific research and automation (FTZ Leipzig).
Funding: SAB
Project partners: Kahnt & Tietze GmbH, Oliment GmbH, Betonwerk Oschatz GmbH
Project duration: 08/2025 – 03/2028
μQuant
Development of an AI-supported, image-based system for the quantitative analysis of microbial contamination
The aim is to conduct research into and carry out the prototypical development of a robot-assisted, image-based analysis system for the automated assessment of various microbial contaminations. The combined approach consists of the prototyping of a device for the automated macroscopic imaging (digitisation) of samples, AI-based image analysis, and the integration of these into laboratory testing processes.
Funding: ERDF
Project partners: Kapelan Bio-Imaging GmbH (coordinator), Institut für Angewandte Informatik e.V., Limbach Analytics GmbH and Sondermaschinenbau Engelsdorf GmbH
Project duration: 01/2025 – 12/2026
EMEK 3D
Development of a material system for the electrical connection of carbon fibres as functional reinforcement for concrete
The EMEK 3D project is investigating an approach involving the fusion of carbon fibre with an electrically conductive material. In collaboration with enspring GmbH, a process and material system is thus being developed which enables a mechanical bond and electrical contact that meets the requirements for an industrially manufactured finished component.
Funding: ZIM of the BMWi | AIF Project
Project partner: enspring GmbH
Project duration: 02/2021 – 02/2023
